Allied Telesis AT-2814FX - Manual (Page 63)

AT-2814FX Fast Ethernet Fiber (SC) ExpressCard Installation and User’s Guide
63
Receive Buffers
The Receive Buffers property sets the number of receive buffers that is
allocated for the AT-2814FX ExpressCard. Increasing this value may
enhance performance in receiving traffic, but consumes more system
memory.
To change the Receive Buffers value, do the following:
1. Access the Device Manger on your operating system.
See “Starting the Device Manager” on page 43.
2. Click the Advanced tab.
The Advanced page is displayed. See Figure 21 on page 46.
3. Select the Receive Buffers property in the Property box.
4. Click on the  in the Value box.
The options are displayed as shown in Figure 33.
Figure 33. Receive Buffers Page