Allied Telesis AT-2814FX - Manual (Page 54)

Chapter 4: Modifying Advanced Properties
54
Jumbo Packet
The Jumbo Packet property specifies the size of the frame that the AT-
2814FX ExpressCard supports. The network performance usually
improves when the larger packet size is specified; however, the network
must be capable of supporting such large packets.
To change the Jumbo Packet size, do the following:
1. Access the Device Manger on your operating system.
See “Starting the Device Manager” on page 43.
2. Click the Advanced tab.
The Advanced page is displayed. See Figure 21 on page 46.
3. Select Jumbo Packet in the Property box.
4. Click on the  in the Value box.
The options are displayed as shown in Figure 28.
Figure 28. Jumbo Packet Page