Allied Telesis AT-2814FX - Manual (Page 58)

Chapter 4: Modifying Advanced Properties
58
Log Status Messages
The Log Status Messages property specifies which messages to be
generated and stored in the event log file.
To change the Log Status Messages setting, do the following:
1. Access the Device Manger on your operating system.
See “Starting the Device Manager” on page 43.
2. Click the Advanced tab.
The Advanced page is displayed. See Figure 21 on page 46.
3. Select Log Status Messages in the Property box.
4. Click on the  in the Value box.
The options are displayed as shown in Figure 30.
Figure 30. Log Status Messages
5. Select one of the following options:
 All Messages— All messages are generated and stored in the
event log.