Installing the driver software, Figure 5. setup file – Allied Telesis AT-2814FX User Manual
Page 24
Chapter 2: Installing the Driver Software
24
Installing the Driver Software
To install the driver software for the AT-2814FX ExpressCard, do the
following:
1. Locate the AT2814FX-drivers-setup zip folder that you downloaded
from the Allied Telesis website onto your system. See “Downloading
the Driver Software” on page 23.
2. Open the folder. Figure 5 shows an example in the Windows XP
operating system.
Figure 5. Setup File
3. Double-click the setup.exe file.
The User Account Control window appears, prompting you to allow the
Marvell Miniport Driver program to make a change on your system.
Note
If you are using Windows XP operating system, the User Account
Control window does not come up. Go to step 5.
4. Click Yes to allow Marvell Miniport Driver to be installed.