Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 154)

AlliedView™-EMS 4.0.3 Device Management Guide Page 154 of 468
Route Table
Displays the IP routing table on the switch.
Note - The current firmware version returns the value 'NULL' for the Routing
Protocol MIB parameter.
Note - The following parameters are implemented as 'read-only':
•
Destination Port Number
•
Routing Type
•
Next Hop AS Number
•
Destination Metric 1
•
Destination Metric 2
•
Destination Metric 3
•
Destination Metric 4
•
Destination Metric 5
•
Row Status
IP Statistics
Displays statistics about IP, such as the number of IP datagrams received.
UDP
Listener Info
Displays UDP listener information.
UDP Statistics
Displays UDP statistics.
TCP
Connection Info
Displays TCP connection-specific information.
Note - The Connection Status parameter is implemented as 'read-only'.
TCP Statistics
Displays TCP statistics.
ICMP Statistics
Displays ICMP statistics.
DHCP Ranges
Displays information about the DHCP module.