Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 60)

AlliedView™-EMS 4.0.3 Device Management Guide Page 60 of 468
•
Transmitted Buffer Length
•
Received Unicast Packets (HC)
•
Received Multicast Packets (HC)
•
Received Broadcast Packets (HC)
•
Transmitted Unicast Packets (HC)
•
Transmitted Multicast Packets (HC)
•
Transmitted Broadcast Packets (HC)
Note - The current firmware version does not allow the Promiscuous Mode
parameter to be set to 'false' as its value.
Note - The current firmware version returns the value 'NULL' for the Specific
Media MIB parameter.
PHY Diagnostics
Test Interface
Displays entries containing objects for invoking tests on an interface.
Note - The current firmware version does not allow the Test Set Type
parameter to be configured. Attempting to configure this parameter to any
valid value will result in the error "The error occurred with 'Set' operation.
Error. bad value.".
TDR Diagnostics Table
Displays entries containing results of tests on an interface.
Error Statistics
Displays error statistics for the ports.
Note - The current firmware version returns a 'noSuchName' value for the following
parameters:
•
Alignment Error Frames
•
Multi Collision Frames
•
SQE Test Errors
•
Deferred Transmissions
•
Carrier Sense Errors
•
Symbol Errors
Note - The Ethernet Chip Set parameter is not applicable to the AT-8000GS series
and should be ignored.