Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 71)

AlliedView™-EMS 4.0.3 Device Management Guide Page 71 of 468
Mid-level Management
Alarm Options
Displays information about alarm options.
MIB Tree
Displays information about the device's MIB tree.
Tuning
Agent Diagnostics
Displays diagnostic information about the agent.
Note - The current firmware version returns a 'noSuchName' value
for the Location parameter.
General Tuning
Displays general tuning information.
Note - The current firmware version accepts values in the range [0-
255] inclusive for the Debug Level parameter.
Note - The current firmware version returns inconsistent values when
configuring High Priority and Low Priority parameters.
Max Entries Tuning
Displays information about the maximum entries in tuning.
Note - The current firmware version does not allow the following
parameters to be configured:
•
Max IP Next Hop Entries After Reset
•
Max IP Prefixes After Reset
•
Max IP ECMP Entry Size After Reset
•
Max IP Interfaces After Reset
TCP Tuning
Displays the memory pool size for TCP tuning.
Radius Tuning
Displays the memory pool size for radius tuning.
Note - The current firmware version returns a 'noSuchName' value
for the Radius Tuning parameter.
Syslog Tuning
Displays the current cache size and its size after reset.