Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 426)

AlliedView™-EMS 4.0.3 Device Management Guide Page 426 of 468
Note - The current firmware version does not allow the following parameters to be
set to '0'.
•
Partner Administrative System Priority
•
Partner Administrative Port
•
Partner Administrative Port Priority
Enable
Enables the port.
Disable
Disables the port.
Stacking Menu
From the Stacking menu, you can view and edit the Stacking MIB.
Stack Status
Displays the stack status information of the device.
Stack Info
Displays information about the stacked devices.
Note - The following parameters are not applicable to the SwitchBlade x908 and
should be ignored:
•
Fallback Config Status
•
Fallback Config Filename
SwitchBlade x908