Allied Telesis AT-S62 - Manual (Page 118)

Chapter 7: MAC Address Table
Section I: Basic Operations 118
Deleting All Dynamic MAC Addresses
To delete all dynamic unicast and multicast MAC address from the MAC
address table, do the following:
1. From the Main Menu, type 4 to select MAC Address Tables.
The MAC Address Tables menu is shown in Figure 27 on page 111.
2. From the MAC Address Tables menu, type 2 to select MAC Addresses
Configuration.
The MAC Addresses Configuration menu is shown in Figure 31 on
page 115.
3. From the MAC Addresses Configuration menu, type 3 to select Delete
All Dynamic MAC Addresses.
The following prompt is displayed:
All learned MAC (non-static) addresses will be deleted
Do you want to continue? [Yes/No] ->
4. Enter Y to delete the addresses or N to cancel the procedure.
If you respond with yes, all dynamic unicast and multicast
addresses are deleted from the table, and the switch begins to
learn new addresses.