Allied Telesis AT-S62 - Manual (Page 729)

AT-S62 Menus Interface User’s Guide
729
802.1x Port-Based Network Access Control Default Settings
The following table describes the 802.1x Port Access Control default
settings.
The following table lists the default settings for RADIUS accounting.
The following table lists the default settings for an authenticator port.
802.1x Port Access Control Setting Default
Port Access Control Disabled
Authentication Method RADIUS EAP
Port Role None
RADIUS Accounting Setting Default
Status Disabled
Port 1813
Type Network
Trigger Type Start_Stop
Update Status Disabled
Update Interval 60
Authenticator Port Setting Default
Port Control Auto
Quiet Period 60 seconds
TX Period 30 seconds
Reauth Enabled Enabled
Reauth Period 3600 seconds
Supplicant Timeout 30 seconds
Server Timeout 30 seconds
Max Requests 2
Control Direction Ingress