Allied Telesis AT-S62 - Manual (Page 228)

Chapter 14: Classifiers
Section II: Advanced Operations 228
Creating a Classifier
This section contains the procedure for creating a classifier. As explained
in Classifier Overview on page 220, a classifier is a series of variables that
you set to define a traffic flow.
To create a classifier, do the following:
1. From the Main Menu, type 7 to select Security and Services.
2. From the Security and Services menu, type 1 to select Classifier
Configuration.
The Classifier Configuration menu is shown in Figure 67.
Figure 67 Classifier Configuration Menu
3. Type 1 to select Create Classifier.
Allied Telesyn Ethernet Switch AT-8524M - ATS62
Production Switch
User: Manager 11:20:02 02-Jan-2004
Classifier Configuration
1 - Create Classifier
2 - Modify Classifier
3 - Destroy Classifier
4 - Show Classifiers
P - Purge Classifiers
R - Return to Previous Menu
Enter your selection?