Allied Telesis AT-S62 User Manual
Page 214
Chapter 13: Event Log
Section II: Advanced Operations
214
For example, the setting of DEFAULT assigns all port mirroring
events a code of 22 and all encryption key events a code of 4.
Your other option is to assign all events from a switch the same
numerical code using one of the following facility level settings:
❑ 1 - LOCAL1
❑ 2 - LOCAL2
❑ 3 - LOCAL3
❑ 4 - LOCAL4
❑ 5 - LOCAL5
❑ 6 - LOCAL6
❑ 7 - LOCAL7
Each setting represents a predefined RFC 3164 numerical code.
The code mappings are listed in Table 6.
9
Clock daemon
Time- based modules:
- TIME (system time and SNTP)
- RTC
22
Local use 6
Physical interface and data link
modules:
- PCFG
- PMIRR
- PTRUNK
- STP
- VLAN
23
Local use 7
SYSTEM events related to major
exceptions.
16
Local use 0
All other modules and events.
Table 6 Numerical Code and Facility Level Mappings
Numerical
Code
Facility Level Setting
17
LOCAL1
Table 5 Applicable RFC 3164 Numerical Code and AT-S62 Module
Mappings
Numerical
Code
RFC 3164 Facility
AT-S62 Module