How do you assign an ip address – Allied Telesis AT-S62 User Manual
Page 58
Chapter 4: Basic Switch Parameters
Section I: Basic Operations
58
How Do You
Assign an IP
Address?
After you have decided which, if any, switches on your network need an
IP address, you must access the AT-S62 software on the switches and
assign the addresses. There are two ways in which a switch can obtain an
IP address.
The first method is for you to assign the IP configuration information
manually. The procedure for this is explained in Configuring an IP
Address and Switch Name on page 59. Initially assigning an IP address to
a switch can only be done through a local management session.
The second method is for you to activate the BOOTP and DHCP client
software on the switch and have the switch automatically download its
IP configuration information from a BOOTP or DHCP server on your
network. This procedure is explained in Activating the BOOTP and DHCP
Client Software on page 62.