Allied Telesis AT-S62 - Manual (Page 617)

AT-S62 User’s Guide
Section VIII: Web Browser Management 617
If you select port status, the Port Status page in Figure 206 is
displayed.
Figure 206 Port Status Page
The information in this page is for viewing purposes only. To
adjust port parameters, refer to Configuring Port Parameters on
page 610.
The columns in the page are described below:
Port
The port number.
Name
The name of the port.
Link
The status of the link between the port and the end node
connected to the port. Possible values are:
Up - indicates that a valid link exists between the port and the end
node.
Down - indicates that the port and the end node have not
established a valid link.
Neg
The status of Auto-Negotiation on the port. Possible values are:
Auto - Indicates that the port is using Auto-Negotiation to set
operating speed and duplex mode.
Manual - Indicates that the operating speed and duplex mode
were set manually.
MDI/X
The operating configuration of the port. Possible values are MDI
and MDI-X.