Allied Telesis AT-S62 - Manual (Page 599)

AT-S62 User’s Guide
Section VIII: Web Browser Management 599
Enabling or Disabling SNMP Management
To enable or disable SNMP management on the switch, perform the
following procedure:
1. From the Home page, select Configuration.
The System page is displayed with the General tab selected by
default, as shown in Figure 194 on page 586.
2. Select the SNMP tab.
The SNMP tab is shown in Figure 198.
Figure 198 SNMP Tab (Configuration)
3. Click Enable SNMP Access to enable or disable SNMP management.
A check in the box indicates that the feature is enabled, meaning that
the switch can be managed from an SNMP management workstation.
No check indicates that the feature is disabled. The default is disabled.