Allied Telesis AT-S62 - Manual (Page 693)

AT-S62 User’s Guide
Section VIII: Web Browser Management 693
Deleting a View
Table Entry
To delete an entry in the SNMPv3 View Table, perform the following
procedure.
1. From the Home Page, select Configuration.
The Configuration System Page is displayed with the General Tab
selected by default, as shown in Figure 194 on page 586.
2. Select the SNMP Tab.
The SNMP Tab is shown in Figure 198 on page 599.
3. In the SNMPv3 section of the page, click the circle next to Configure
View Table. Then click Configure.
4. The SNMPv3 View Table Page is shown in Figure 236 on page 690.
5. Click the circle next to the View Table entry that you want to delete.
Then click Remove.
A warning message is displayed. Click OK to remove the View
Table entry.
6. To save your changes, return to the General Tab and click Save
Changes.