Allied Telesis AT-VIEW PLUS 3.0 INSTALLATION - Manual (Page 17)

Allied Telesyn AT-VIEW PLUS 3.0
INSTALLATION GUIDE
7 INTEGRATING AT-VIEW PLUS 3.0 WITH OPENVIEW
The AT-View Plus 3.0 installer automatically detects if HP OpenView is installed and will perform the
necessary integration so that AT-View Plus 3.0 can be started from within OpenView. After integration,
the “AT-View Plus” submenu is added to the “Tools” menu. “AT-View Plus” contains the options “Device
Manager” and “AMIGO”.
To start AT-View Plus for an Allied Telesyn device, follow the steps below:
1. Select an Allied Telesyn device on the network map.
2. Select Tools or right click on the device icon then choose AT-View Plus>Device Manager or AMIGO.
3. Device Manager or AMIGO will be launched.
PN 613-50659-00 Rev A Page 17 of 26