Windows nt server (tcp/ip) – Allied Telesis LanEdge Print Server User Manual
Page 12
Page 10
Windows NT Server (TCP/IP)
1. Run the SETUP program in the root directory of the CD-
ROM. Select Utilities, and install BiAdmin.
2. Run BiAdmin. Select the Print Server, then click the
TCP/IP icon. Enter and save the TCP/IP values.
If the Print Server is not listed, use Set IP Address on the
InitDevice menu to assign an IP Address. You need to
know the Default Name, which is shown on a sticker on
the base of the Print Server.
3. Ensure that Microsoft TCP/IP printing service support is
installed on your Windows NT server system.
4. Use the Add Printer Wizard to create a printer for each
port on the Print Server. Use the following data:
•
Port - LPR port (use Add Port if necessary)
•
Name or address of server - IP address of the Print
Server.
•
Name of printer - Use L1 for parallel port 1 on the
Print Server and L2 (parallel port 2), L3 (parallel port
3). L1… Ln (n=8) is logical printer name.