Allied Telesis LanEdge Print Server - Manual (Page 5)

Page 3
Note: Because Print Server is set as DHCP client as default., It
is not necessary to assign an IP address to Print Server if there
is DHCP server in this LAN.
Window 95/98/NT Installation
The Print Server Driver must be installed on each PC, as
follows:
1. Run the SETUP program in the root directory of the CD-
ROM. Select Utilities, and install Windows Peer-to-peer
Printing.
2. Select the appropriate protocol (NetBEUI or TCP/IP) for
your LAN.
•
If TCP/IP is selected, select Device Driver on the
Select Components screen.
3. The Configure Print Server window will appear. An
example screen is shown below.
Figure 1: Configure Print Server