Allied Telesis LanEdge Print Server - Manual (Page 9)

Page 7
Figure 4 Select Port (Windows 95/98)
8. Configuration is now complete.
You can now print using the printers attached to the Print
Server.
Printing Using MS-DOS Programs
If you are running Windows 95/98/NT 4.0 and need to print,
using an MS-DOS program, to a printer connected to the Print
Server, follow this procedure:
1. Use Start - Settings - Printers to run the Windows Add
Printer wizard. Create a new printer, with the following
attributes.
•
Local printer, using the "LPT1" port (parallel port 1).
•
Printer type/model matches the printer connected to
the Print Server that you wish to print to.
2. Use Start - Settings - Printers to open the Printers folder.
Select this printer, and then File - Properties.