Netware 3.x, 4.x print server mode – Allied Telesis LanEdge Print Server User Manual
Page 13
Advertising
Page 11
NetWare 3.x, 4.x Print Server Mode
For Remote Printer mode, please refer to the full user manual
on the CD-ROM.
1. Copy the file QUICKSET.EXE from the
\Utility\Dos
directory on the CD-ROM to your
workstation’s hard disk.
2. Log in to the NetWare server as ADMIN.
3. Run Quickset with the following syntax, to configure both
the Print Server and the NetWare server.
Quickset Name /FS=F
Where Name is the Default Server Name shown on a
sticker on the base of the Print Server, and F is the master
file server. (The /FS=F parameter is not required for NDS
mode.)
4. Use the CAPTURE command to redirect print jobs to the
queues created by QUICKSET.
Advertising