Allied Telesis LanEdge Print Server - Manual (Page 14)

Page 12
Using NDPS (NetWare 5)
The following procedure is designed to enable Public Access
Printing under NDPS, using the TCP/IP network protocol.
Public Access Printing allows anybody on the network to
access the printer.
It is assumed that you are already using NDPS, and have
created a NDPS Manager Object on the NetWare 5 server. (If
you have not done so, please refer to full user manual on the
CD-ROM for details of this procedure.)
Print Server Configuration
1. Run the SETUP program in the root directory of the CD-
ROM. Select Utilities, and install BiAdmin.
2. Run BiAdmin. Select the Print Server, then click the
TCP/IP icon. Enter and save the TCP/IP values.
If the Print Server is not listed, use Set IP Address on the
InitDevice menu to assign an IP Address. You need to
know the Default Name, which is shown on a sticker on
the base of the Print Server.
3. Select the Print Server, then the Logical Ports icon. Check
the required Logical Printer data, save and exit. (For
example, Physical output port)
Creating an NDPS Printer Agent
1. Start the NDPS Manager object you will be using to
control the Printer Agent.
2. At the Identification page, click the Printer Agent List
3. Click "New" to see the Create Printer Agent window, as
shown below.