Allied Telesis LanEdge Print Server - Manual (Page 16)

Page 14
Figure 6 Configure Port Handler
10. In the Host address IP field, enter the IP Address
previously assigned to the Print Server device.
11. In the Printer Name field, enter the Logical Port name on
the Print Server. (e.g.: L1)
Note: For Print Servers with one parallel port, the logical
ports are named L1, L2 and L3. For devices with three
parallel ports, the logical ports are named L1 to L8.)
12. Click Finish, then select appropriate drivers for Windows
3.1, Windows 95/98 and Windows NT 4.
13. The new Printer Agent will now appear in the Printer
Agent List window
Repeat this procedure for any other ports on the Print Server, or
for any other logical printers you wish to use.