Factory default gain settings, Throttle rudder – Spektrum SPMAR635 User Manual

Page 17

Advertising
background image

EN

17

Factory Default Gain Settings

To access to factory default gain settings of the AR635, a transmitter stick
combination must be used. With the transmitter powered ON, hold full right
rudder in combination with throttle full down, then power ON the receiver. After
5 seconds, the red and green LEDs will flash, indicating all gain values have
been restored to default settings. Release the rudder stick.
See the figure below for stick combinations:

Restore Gain to Factory Default Stick Combination:

Throttle / Rudder Reversing

Mode 1

Throttle

Rudder

Mode 2

N

N

EXIT MENU: Move the controls to neutral, then throttle fully down to exit the
menu. The ESC will regain control.

Default Gain Value: Sport Aircraft

Aileron

Elevator

Rudder

Gear up
(Gear SW Pos 1)

70%

70%

70%

Gear Down
(Gear SW Pos 0)

70%

70%

70%

Default Gain Values: 3D Aircraft

Aileron

Elevator

Rudder

3D Flight
(Gear SW Pos 1)

80%

80%

90%

General Flight
(Gear SW Pos 0)

40%

20%

30%

Advertising