Audiovox CDM-9900 - Manual (Page 104)

102
Chapter 8
To change the main LCD backlight setting (in-use):
1. Press the left softkey under Menu then press 7 2 1 4 .
2. Select Normal or Always On then press .
♦ Normal: Operates the same as the main LCD backlight setting
(standby).
♦ Always On: Keeps the display backlight on until you finish the call.
To set the backlight brightness of the main display:
1. Press the left softkey under Menu then press 7 2 1 5 .
2. Select High or Low then press .
♦ High: Sets the normal mode.
♦ Low: Sets the power save mode.
Note: Long backlight settings affect the battery’s talk and standby times.