Audiovox CDM-9900 - Manual (Page 35)

33
Chapter 2
Call Waiting
If you have Call Waiting service, you may hear a beep tone when
you are on a call alerting you of an incoming call. “New Caller” is
displayed along with the new caller’s name and number.
1. To answer the new call, press
VAD
.
2. To switch between the two calls, press
VAD
again.
Three-Way Calling
Three-Way Calling allows you to call a third party when a call is
already in progress. This service is system dependent.
1. To call the third party, enter a number and press
VAD
.
2. To connect all three parties, press
VAD
again.
Sending Tones
There are three ways to send tone signals to the party during a call.
Sending Tones from Keypad
When “DTMF Send (Menu 716)” (page 100) is on, tone signals are
sent to the party as you press digit keys during a call.
Sending Tones from Display
To send tone signals from the display during a call when “DTMF
Send (Menu 716)” (page 100) is off:
1. Enter the number during a call.
2. Press the right softkey under Options , select Send Tone then
press .
Sending Tones from Memory
To send tone signals from the phonebook memory during a call:
1. Press the left softkey under Menu during a call, select Phone-
book then press to find a number.
2. Select the number you want to send in tone signals then press the
right softkey under Options . Select Send Tone then press .