Audiovox CDM-9900 - Manual (Page 79)

77
Chapter 5
Camera Mode Options
When the camera mode is active, the following options are avail-
able by pressing the right softkey under
Options :
♦ Shutter Sound: Select Shutter Sound, Click Sound, Beep, Say
Cheeze!, or Silent. (The shutter does not sound, if your phone’s
Ringer Volume is set to Silent or Vibration Alert is activated.)
♦ Resolution: Select Large (480x640), Medium (240x320) or
Small (120x160).
♦ Quality: Select the picture quality Normal or Fine.
♦ Flash: Select Off, On This Shot, or Always On.
♦ Zoom: Select 1X or 2X for the Medium resolution; select 1X, 2X
or 4X for the Small resolution.
♦ Brightness: Select the brightness by pressing
or .
♦ Picture Effects: Select Off, Black & White, Sepia, Watermark,
or Glitter. (The last two are only for the Medium and Small reso-
lutions.)
♦ Self-timer: Activate the timer for the current shot (see page 79).
♦ Self Shot: Switch the monitor to the sub display or back to the
main display. (This helps you view yourself when the phone is half
open and placed on a table.)
♦ LED Blink: Select On or Off.
♦ Video Mode: Switch to the video mode to record videos. (You
may also press to switch to the video mode.)
♦ Other:
• Picture Frames: Select your favorite picture frame (only for
the Medium resolution).
• Date Stamp: Select On or Off (for the Medium resolution).
• Memory Gauge: Select Show or Hide.
• Finder Scope: Select Show or Hide.
Note: Exiting the camera mode resets Flash, Zoom, Brightness, Picture
Effects, Self Shot and Picture Frames to their default settings.
Note: Once you have taken a picture, the picture frame and picture
effect cannot be removed from the picture.