Audiovox CDM-9900 - Manual (Page 24)

22
Chapter 1
Using the Battery
Installing the Battery Pack
1. Press and hold the latch on the phone
and slide the battery cover to remove it.
2. Insert the bottom of the battery pack
into the phone and place it down.
3. Place the battery cover on the phone
and slide it until the latch snaps into
place.
Note: Make sure the cover is securely attached to the phone. The bat-
tery pack may separate from the phone if the cover is not prop-
erly attached.
Removing the Battery Pack
1. Make sure the power is off. Press and
hold the latch on the phone and slide
the battery cover to remove it.
2. To remove the battery pack, lift up
using the tab at the top of the battery.
Tip: When using the optional accessory BTE-9900 Extended Lithium
Ion Battery Pack, use the supplied battery cover.