Audiovox CDM-9900 - Manual (Page 49)

47
Chapter 3
Prepending Dialing
Convenient for adding an area code to a number from the phonebook.
1. From the standby mode, press the right softkey under Contacts .
2. To display the details screen, select the entry then press .
3. Select the phone number then press the right softkey under
Options .
4. Select Prepend Dial then press .
5. When Prepend Dial screen appears, enter the digits you want to
add, then press
VAD
to dial.
Note: Added digits are only applied for the current call.
Dialing Numbers with Pauses
To dial a phone number with hard pause (P):
1. From the standby mode, press the right softkey under Contacts .
2. Select the entry then press to display the details screen.
3. Select the number then press
VAD
. The phone number will be
dialed.
4. Press
VAD
again. The additional number will be sent in tone signals.
5. Succeeding numbers can be sent sequentially by pressing
VAD
.
To dial a phone number with two-second pause (T):
1. From the standby mode, press the right softkey under Contacts .
2. Select the entry then press to display the details screen.
3. Select the number then press
VAD
. The phone number will be
dialed. With two-second pause, the additional number will auto-
matically be sent in tone signals.
Note: To save phone numbers with pauses, see “Digits Options” on page 44.