Audiovox CDM-9900 - Manual (Page 116)

114
Chapter 8
Data Mode (Menu 763)
Sets the mode for receiving asynchronous data calls up to 14.4 kbps.
1. Press the left softkey under Menu then press 7 6 3 .
2. Select Off, Data or Data Once then press .
♦ Off: Does not receive data calls.
♦ Data: Receives data calls while the phone is on.
♦ Data Once: Receives one data call.
When Data or Data Once is selected, the icon will appear on
the display.
Note: 1. After receiving one data call or after 10 minutes, Data Once will
automatically be reset to Off.
2. Voice calls cannot be received when Data mode is set.
3. “Data Service (Menu 762)” is automatically set to Circuit when
the “Data Mode (Menu 763)” is set to Data.
4. When your phone is working in Data mode, you can only use .
5. “Data Mode (Menu 763)” cannot be set if TTY mode is active.
6. To send asynchronous data, the “Data Mode (Menu 763)” setting
is not necessary. “Data Service (Menu 762)” must be set to Cir-
cuit to send asynchronous data.
Quick Reference
To Do
Data Service Data Mode
(Menu 762) (Menu 763)
To access Internet (Packet) Packet (Off)
To access Internet (QNC) Circuit N/A
To receive asynchronous data (Circuit) Data
To send asynchronous data Circuit N/A
To make or answer voice calls N/A Off