Nikon P1 - P2 - Manual (Page 169)

157
T
e
chni
ca
l Note
s
COMMUNICATIONS
ERROR
E
USB cable disconnected
or memory card removed
while images are being
transferred to computer.
If error appears on com-
puter monitor, click OK to
exit PictureProject. Turn
camera off, reconnect
cable or replace memory
card, then turn camera on
and transfer images.
12 -
62
A computer is executing
some form of processing.
If error appears on com-
puter monitor, click OK
and transfer images after
the processing has com-
pleted.
–
USB option set incorrectly
to transfer images using
camera’s d (Transfer E)
button.
Turn camera off and dis-
connect cable, then choose
new USB setting in the
camera Set-up menu and
reconnect camera. If error
persists, use transfer but-
ton in PictureProject to
transfer images.
61,
62, 64
NO IMAGES ARE
MARKED FOR
TRANSFER
s
No pictures selected for
transfer when d (Trans-
fer E) button pressed
to transfer images to
computer.
• Disconnect camera and
select at least one pic-
ture for transfer, then
begin transfer again.
• Use Transfer button in
PictureProject to trans-
fer images.
62,
63,
64,
112
TRANSFER ERROR
E
Error occurred when
images were transferred
to computer.
• Check that camera is
connected and that
battery is fully charged.
• Check that optional
EH-62C AC adapter is
firmly connected to the
camera.
14,
62
–
Display Problem Solution c