Nikon P1 - P2 - Manual (Page 175)

163
T
e
chni
ca
l Note
s
PictureProject
does not start
when camera is
connected or
memory card
inserted in card
reader or card
slot
• Camera is off.
• The optional EH-62C AC adapter kit is not properly
connected, or battery is exhausted.
• UC-E6 USB cable is not correctly connected, or card
not properly inserted in card reader or card slot.
• USB in the Interface menu set to PTP when camera
connected to computer running Windows 2000 Pro-
fessional, Windows Millennium Edition (Me), or Win-
dows 98 Second Edition (SE).
• Camera is not registered in Device Manager (Win-
dows only).
See PictureProject Reference Manual (on CD) for further
information.
14
14
62
61
–
CHOOSE PRO-
FILE screen does
not appear in
Wireless transfer
mode
• Set the USB option to PTP in the Interface menu of
the setup menu.
61
Signal is weak
• Set host.
• Move closer to the access point.
• Remove any obstacles between the camera antenna
and computer.
• Change camera facing.
138
–
Signal was
interrupted and
picture could
not be sent
• Turn the camera off and then turn it on again. 141
Problem Possible cause c