Nikon P1 - P2 - Manual (Page 171)

159
T
e
chni
ca
l Note
s
Error Messages During Wireless Transfer Mode
Display Problem Solution c
Transfer error
u
Error occurred when
images were transferred
to computer.
Check the signal.Remove
any obstacles between
the camera antenna and
the profile device.
–
Profile not registered.
Set up profile.
u
A profile for wireless
transfer has not been set.
Set profile device with the
Wireless Camera Setup
Utility or the optional PD-
10 wireless printer
adapter.
138
u NETWORK
CONNECTION FAILED
Camera could not con-
nect to wireless network.
Check the selected com-
puter or access point.
Check the network set-
tings.
141
Battery exhausted.
Transfer terminated.
w
Battery has become
depleted while images
were being transferred. Charge the battery and
turn the camera on in
Wireless transfer mode.
8
u Failed to connect
to XXX
Camera could not con-
nect to selected profile
device (computer).
Check the selected com-
puter.
141
Connection error.
u
Wireless connection with
the profile device stopped
while the camera was
connected to the net-
work.
Check the signal.Remove
any obstacles between
the camera antenna and
the profile device.
–