Nikon P1 - P2 - Manual (Page 86)

74
M
o
re
on
P
la
y
ba
ck
Error Messages
If an error message is displayed, an error has occurred. After checking
the printer and resolving any problems as directed in the printer man-
ual, highlight Resume and press d to resume printing. Select Can-
cel to exit without printing the remaining images.
Resume may not be selected depending on the type of error. If this
happens, select Cancel.
Printing Displayed Picture
Connect the camera to the printer. Press d with the picture dis-
played to display the Print menu. To print a single picture according
to the printer paper size settings, press multi selector up or down to
select Start print and press d.
To change the number of prints or paper size, press multi selector up
or down and select Copies or Paper size.
View selected pictures. Press multi selec-
tor up or down to view pictures not visi-
ble in display.
• To return to the PRINT SELECTION
screen, press m button.
Start printing.
• To interrupt printing, press d.
Message shown on the left is displayed
when printing is complete. Turn camera
off and disconnect USB cable.
• To print continuously press d. The dis-
play returns to the PictBridge dialog
(c71).
006 PRINTS 006 PRINTS
Back Start print
1 1 2 2 3 3
6 6 5 5 4 4
Printing
002/006
Cancel Cancel
Done
PRINTER ERROR
CHECK PRINTER
STATUS
Resume
Cancel
Copies
Start print
PRINT MENU PRINT MENU
Paper size
Confirm