Nikon D100 - Manual (Page 158)

Custom Settings
Menu Guide—Custom Settings
146
Custom Setting 0: Bank Select
Custom settings are stored in one of two
“banks,” Bank A or Bank B, which are indepen-
dent of the banks used to store shooting menu
settings. Changes to settings in one bank have
no effect on the other. If there is a particular
combination of settings you use frequently, you
can select Bank A and set the camera to these
settings. The camera will “remember” these
settings even when turned off, and restore them the next time Bank A is
selected. You can create another combination of settings using Bank B and
switch instantly from one combination to the other by selecting the appro-
priate bank from the Bank Select menu.
Any changes to settings in the custom settings menu are automatically
stored in the bank currently selected in the Bank Select menu. The default
bank is Bank A.
OK
Custom Setting
Bank
Bank A
Bank B
F0
CSM MENU
Bank Select
If a bank in which ON is selected for Custom Setting 3 (ISO Auto; 148) is chosen
after ISO has been set to or , sensitivity (ISO equivalency) will
NOT
be adjusted
automatically.
“CSM”
CSM is displayed in the control panel when settings in
the current bank are modified from default values.
Using the Multi Selector
The multi selector can be used at any time when the monitor is on. The focus selector
lock switch only takes effect when the monitor is off.