Television playback – Nikon D100 User Manual
Page 180
Connections—T
elevision Playback
168
Television Playback
Connecting Your Camera to a Video Device
Using the EG-D1 video cable provided, you can connect the D100 to a televi-
sion or VCR for playback or recording.
1
Turn the camera off. Be sure to turn the cam-
era off before connecting or disconnecting the
video cable.
2
Open the cover protecting the camera’s inter-
face connectors.
3
Connect the camera to the video device as shown.
Connect to
video device
Connect to
camera
4
Tune the television to the video channel.
5
Turn the camera on. When the
button is pressed to play pictures back
or the
button pressed to display camera menus, photographs and cam-
era menus will be displayed on the television screen or recorded to video
tape. The camera monitor will remain blank, but the camera will function
normally in all other respects.
Use an AC Adapter
To minimize the drain on the battery, use an EH-5 AC adapter (available separately)
during television playback.
Video Output (
164)
The default setting for Video Output is NTSC. Choose PAL when connecting to a PAL
device. Note that resolution will drop when images are output on a PAL device.