Nikon Coolwalker - Manual (Page 53)

43
A
d
va
n
ce
d
O
p
er
at
io
n
—
Pr
in
tin
g
V
ia
D
ire
ct
U
SB
C
o
n
n
ec
tio
n
(P
ic
tB
rid
g
e)
Before Starting Direct Printing
• Check if your printer supports direct printing via direct USB connection (PictBridge).
• Before beginning direct printing, confirm your printer settings. For information on setting the
printer, refer to your printer documentation.
Power Supply Source
When printing via direct USB connection, use the provided DSA-0151-05 AC adapter to maintain
continuous stable power supply.
If using the battery pack, make sure it is sufficiently charged.
Connecting and Disconnecting the USB Cable
• Do not connect the USB cable until "Connect to printer" is displayed on the monitor.
• Disconnect the USB cable only when "Disconnect printer" is displayed on the monitor after you
have pressed DONE (Left button) in the direct print menu.
If an Error Message is Displayed
If an error message is displayed during printing ( 63), check your printer connection and settings.
After solving the problem that caused the error, press CONT. (Right button) to resume printing.
To abort printing, press CANCEL (Left button).
Printing Images Stored on the MSV-01
Highlight Print images in HDD from the
direct print menu (
42) using or .
Press to display the list view. Select a
folder containing images for printing.
• Use
or to highlight a folder.
• Use to display a list of sub-folders
inside the selected folder. Use to close
the list view of sub-folders.
• To return to Step 1, press CANCEL (Left
button).
Press to go to the SELECT PRINT
IMAGES screen. Use or to scr oll
through thumbnails of images shown in
the top section of the monitor. The cur-
rently selected image is shown in the lower
section of the monitor.
• To return to Step 2, press LIST (Left
button).
Press (+) to select the current image for
printing.
• The set number of prints is displayed on
the selected images.
1 2
3 4