Nikon Coolwalker - Manual (Page 73)

63
Te
chni
ca
l N
o
te
s—
Error
M
essa
ge
s
When the Power-on Lamp Blinks with Red
When the power-on lamp blinks with red, this indicates that a charging error has occurred.
Disconnect the AC adapter from the MSV-01 and the power outlet. Clean the plugs and re-connect
the AC adapter.
If the error persists, contact your retailer or Nikon representative.
NO IMAGE FILE
EXISTS. Folder(s) selected
for playback
contain(s) no
supported images. • Select a folder containing images
from list view or thumbnail
playback mode.
• Insert memory card containing
images, or copy images to MSV-01
HDD.
• The image cannot be displayed on
MSV-01. View file on computer or
camera used for shooting.
–
13
–
CANNOT DISPLAY • MSV-01 does
not support
this file
format.
• Image size
exceeds
supported
dimensions.
CARD FORMAT ERROR Error has occurred
during formatting
memory card. Try to format card again. If error
persists, contact your retailer or Nikon
representative. 55
HDD FORMAT ERROR Error has occurred
during formatting
HDD. Try to format hard disk again. If error
persists, contact your retailer or Nikon
representative. 55
UNSUPPORTED
FILE FORMAT Your printer does
not support this
file format. Check your printer specification and
image file format. –
INK LOW Ink low Check printer. Press Cont. (Right
button) to continue printing 43
OUT OF INK No ink Check printer. For solutions see
operation manual of your printer. –
OUT OF PAPER Paper tray empty Check printer. For solutions see
operation manual of your printer. –
INCORRECT PAPER SIZE Paper size selected
is different from
paper tray
detected Check printer. For solutions see
operation manual of your printer. –
PAPER JAM Paper jam Check printer. For solutions see
operation manual of your printer. –
CHECK
PRINTER CONNECTION. Printer
communication
error Check USB cable connection. Make
sure that printer is turned on. 42
UNKNOWN PRINT ERROR Unknown error
occurred during
printing Check printer. For solutions see
operation manual of your printer. –
CONNECT AC ADAPTER
AND TRY AGAIN. No power supply
from AC adapter. Check AC adapter connection and
repeat last operation. –
Display Problem Solution