General camera setup, The setup menu, A103) – Nikon P330 User Manual
Page 121: A103), use t, A103, Tup menu, 103) is set to, A103) when shooti, A103) is set to
103
Ge
ne
ral C
a
mera S
etu
p
General Camera Setup
The Setup Menu
From the menu screen, select the z tab to display the
setup menu, and then you can change the following
settings.
Press the
d button M z (setup) tab (A7)
Option
Description
A
Welcome screen
Set whether or not the welcome screen is displayed
when power is turned on. The welcome screen image
can be selected.
The default setting is None.
Time zone and date
Set settings related to the camera’s date and time. The
Time zone setting allows you to specify the time zone
where the camera is mainly used and whether or not
daylight saving time is in effect. When the x travel
destination is set, the camera automatically calculates
the time difference between the travel destination and
the w home time zone, and saves images using the
date and time of the travel destination.
Monitor settings
In Photo info, select the kind of information that is
displayed on the monitor during shooting mode and
playback mode. If you select Framing grid+auto info, a
framing grid is displayed when shooting to help you frame
the picture. Also set the image display after shooting, the
monitor brightness and whether or not to display
histograms on the monitor.
Print date
Imprint the shooting date and time on pictures at the
time of shooting. The default setting is Off.
Dates cannot be imprinted in the following situations.
- When the scene mode is set to Easy panorama,
Panorama assist or 3D photography
- When Image quality (
A69) is set to RAW (NRW) +
Fine, RAW (NRW) + Normal or RAW (NRW)
- When Pre-shooting cache, Continuous H: 120
fps or Continuous H: 60 fps is selected for
Continuous (
- During movie recording
AF assist
Motion detection
Vibration reduction
Print date
Monitor settings
Time zone and date
Welcome screen
Set up