Nikon P330 - Manual (Page 199)

E75
The Setup Menu
Re
fe
re
nce
S
e
ct
io
n
Vibration Reduction
Compensate camera shake. Camera shake is also compensated when recording
movies as well as when shooting still images.
• When using a tripod to stabilize the camera, set vibration reduction to Off.
When Normal or Active is selected, an icon for the setting is displayed on the
monitor (
A8).
B
Notes on Vibration Reduction
• Immediately after the power is turned on or the camera enters shooting mode from playback
mode, wait until the monitor screen stabilizes before shooting.
• Due to the characteristics of the vibration reduction function, images displayed on the monitor
screen immediately after shooting may appear blurry.
• Vibration reduction may be unable to completely eliminate the effects of camera shake in some
situations.
• When the X (Night landscape) or Night portrait scene mode is set to Tripod, the camera shake
is not compensated even if Vibration reduction is set to Normal or Active.
Press the d button M z tab (A7) M Vibration reduction
Option Description
g
Normal
(default setting)
Compensate camera shake that commonly occurs when shooting at
a telephoto zoom position or slow shutter speed. The camera
automatically detects the panning direction and only compensates
for vibration caused by camera shake.
When the camera is panned horizontally, for example, vibration
reduction only reduces vertical shake. If the camera is panned
vertically, vibration reduction only compensates for horizontal shake.
Z Active
Camera shake is automatically compensated during shooting if a
comparatively large camera shake is likely to occur when
shooting from a car or under poor foothold conditions.
k Off
Vibration reduction is not enabled.