Connecting the camera to a printer (direct print), Connecting the camera to a printer – Nikon P330 User Manual
Page 144
E20
Re
fe
re
nce
S
e
ct
io
n
Connecting the Camera to a Printer (Direct Print)
Users of PictBridge-compatible (
F22) printers can connect the camera directly to
the printer and print pictures without using a computer.
Connecting the Camera to a Printer
1
Turn off the camera.
2
Turn on the printer.
• Check the printer settings.
3
Connect the camera to the printer using the included USB cable.
• Be sure that the plug is oriented correctly. When disconnecting the cable, do not pull
the plug at an angle.
4
The camera is automatically turned on.
• When connected correctly, the PictBridge startup screen (1) is displayed on the
monitor screen of the camera. Then the Print selection screen (2) is displayed.
B
If the PictBridge Startup Screen Is Not Displayed
Turn the camera off and disconnect the USB cable. Set the Charge by computer option (
the camera’s setup menu to Off and reconnect the cable.
32
32
NO.
2013
15/05
Print selection