Nikon P330 User Manual
Page 123
105
The Setup Menu
Ge
ne
ral C
a
mera S
etu
p
Format memory/
Format card
Format the internal memory (only when a memory card
is not inserted) or the memory card (when a memory
card is inserted).
• All data stored in the internal memory or on the
memory card is deleted during formatting and
cannot be restored. Be sure to transfer important
images to a computer and save them before
formatting.
Language
Change the camera’s display language.
TV settings
Adjust settings for connection to television.
• When the camera is connected to a television using
an audio/video cable but no picture is displayed on
the television, set Video mode to NTSC or PAL
according to the type of signal compatible with the
television.
• HDMI settings can be set.
Charge by computer
When set to Auto (default setting), you can charge the
camera's battery by connecting the camera to a
computer (provided that the computer is able to
supply power).
• When charging by computer, it may take more time
to charge the battery than when using the Charging
AC Adapter EH-69P.
Toggle Av/Tv
selection
Switch the method for setting the flexible program,
shutter speed or aperture value.
When Do not toggle selection (default setting) is
selected, use the command dial to set the flexible
program or shutter speed and use the multi selector to
set the aperture value.
When Toggle selection is selected, use the multi
selector to set the flexible program or shutter speed
and use the command dial to set the aperture value.
• This option is enabled only when the shooting mode
is
A, B, C, D or i.
Reset file numbering
When Yes is selected, the sequential numbering of file
numbers is reset. After resetting, a new folder is created
and the file number for the next image taken starts
from “0001.”
Blink warning
When the camera detects that a human subject may
have closed the eyes immediately after taking a picture
using face detection (
A80) while shooting with
modes other than the smile timer, the Did someone
blink? screen is displayed on the monitor to check the
picture taken. The default setting is Off.
Option
Description
A