Nikon S7c - Manual (Page 155)

141
For Connection via Home Wireless LAN
W
ire
le
ss
T
ra
n
sfe
r Mod
e
Settings for the Setup Utility
When configuring a profile using the Setup Utility, refer to the description for
each item listed below. Settings are the same for Windows and Macintosh.
* Mandatory items
Settings Descriptions
Network name
(SSID)*
Enter the network ID for the computer. Choose a value dis-
played. If multiple values are displayed, select one.
Network type*
Select [Ad-hoc] or [Infrastructure]. The camera and computer
must be set to the same configuration.
• Ad-hoc mode: This mode establishes a peer-to-peer (one-to-
one) connection between the camera and computer.
• Infrastructure mode: This mode connects the camera and
computer via a wireless LAN access point.
Channel
Mandatory if [Ad-hoc] is selected for [Network type]. Select the
same channel (1 to 11) set in the computer.
Authentication
Select [Open System], [Shared Key], [WPA-PSK]* or [WPA2-
PSK]* (* [Infrastructure] only). Select the same method set in
the computer or access point.
Encryption
Available methods for the camera differ depending on the
selected authentication method (see below). Select the same
method set in the computer or access point.
Encryption key
Enter the security key set in the computer or access point
(unnecessary when [Encryption] is set to [None]).
Key index
When [Encryption] is set to [WEP], and infrastructure mode is
used, select the same key index set in the computer or access
point (unnecessary when [Encryption] is set to [None], [TKIP] or
[AES]). The default setting is [1].
Selected authentica-
tion method
Available security method(s) for
the camera
[Open System] [None], [WEP]
[Shared Key] [WEP]
[WPA-PSK] [TKIP]
[WPA2-PSK] [AES]