Nikon S7c - Manual (Page 183)

169
Error Messages
Te
ch
n
ica
l No
te
s
Wireless Transfer Mode
Display Problem Solution c
Transfer error Error during image trans-
fer.
Check signal strength.
Move the camera closer
to the profile device or
remove obstruction
between the camera and
device.
–
Profile not regis-
tered. Set up profile.
No profile devices are
configured for wireless
transfer.
Configure profile devices
using Wireless Camera
Setup Utility or PD-10
wireless printer adapter.
134,
158
Battery exhausted.
Transfer terminated.
Battery ran out during
image transfer.
Recharge battery, turn
camera on again and set
it to wireless transfer
mode.
18
Failed to connect to
(SSID/profile device)
Selected profile cannot
be used.
• IP address saved in the
camera may be incor-
rect. Confirm settings
using Wireless Camera
Setup Utility.
• Change firewall set-
tings.
134,
158