Electronically controlled cameras, Shooting – Nikon S7c User Manual

Page 186

Advertising
background image

172

Troubleshooting

Te

ch

n

ica

l No
te

s

Electronically Controlled Cameras

In extremely rare instances, unusual characters may appear in the monitor and the camera
may stop functioning. In most cases, this phenomenon is caused by a strong external static
charge. Turn the camera off, remove and replace the battery, and then turn the camera on
again. In the event of continued malfunction, contact your retailer or Nikon representative.
Note that disconnecting the power source as described above may result in the loss of any
data not recorded to internal memory or the memory card at the time the problem occurred.
Data already recorded will not be affected.

Shooting

Date not appearing on pictures

even when [Date imprint] is

enabled

Date does not appear on movies or on

pictures taken using P, N, F, [Contin-

uous], or when option other than [Off] is

selected for [BSS].

41, 45,

47, 70,

102,

104

Camera settings reset

Backup battery is exhausted; all settings

were restored to their default values.

118

Problem

Cause/Solution

c

No picture taken when shutter-

release button is pressed

• Camera is in playback mode: press

o

.

• Menus are displayed: press m.

• Battery is exhausted.

• Flash lamp blinks: flash is charging.

30

11

24

33

Camera cannot focus

• Subject is low in contrast, dominated

by repeating geometric patterns, cov-

ers too small an area of the frame, or

contains many fine details, objects of

sharply differing brightness, or objects

at different distances from the cam-

era. Use focus lock to focus on

another subject at same distance.

• Focus error. Turn camera off and then

on again.

29

24

Problem

Cause/Solution

c

Advertising