Nikon S7c - Manual (Page 26)

12
Basic Operations
In
tro
duc
ti
on
The Rotary Multi Selector
The rotary multi selector is made up of the outer ring, the rotating inner ring
(between the outer ring and d button), and the d button. When selecting
menus or pictures, you can either press the outer ring up, down, left, or right, or
rotate the inner ring. When choosing from numerous menu items or pictures, it is
recommended to rotate the inner ring for easy scrolling, and faster operation.
This section describes standard uses of the rotary multi selector to select modes,
select menu options, and to apply selection.
For the Mode-selection Menu
• To move the highlight clockwise, turn clockwise, press down or right.
• To move the highlight counterclockwise, turn counterclockwise, press up or left.
• To apply selection, press d.
For the Menu Screen
• To move the highlight upward, turn counterclockwise, or press up.
• To move the highlight downward, turn clockwise, or press down.
• To apply selection, press right or d.
• To cancel setting and return to the previous screen, press left.
k
Notes on the Rotary Multi Selector
• In many cases, you can choose how to use the rotary multi selector to perform an opera-
tion. For example, rotating the selector clockwise and pressing the selector right may pro-
duce the same results. Since the selector can be used in various ways, concrete descriptions
such as “Press the rotary multi selector J” are included only in cases where necessary.
• In the manual, the button indicating up, down, left, and right of the rotary multi selector is
shown as GHIJ.
Press up.
Turn clockwise.
Press right.
Press down.
Press left.
Turn counterclockwise.
Play
Press d.
Press up.
Turn clockwise.
Press right.
Press d. Press down.
Press left.
Turn counterclockwise.
B
Shooting menu
Exit
Image mode
White balance
Exp. +/-
Continuous
BSS