Nikon SB-27 - Manual (Page 23)

Selecting a flash mode
23
For available flash operations in each camera group, consult the
table below.
Camera
Available flash operation
Flash smode Reference
group indicator page.
･ Automatic Balanced Fill-Flash with
TTL Multi Sensor****
P. 24
I */**
･ Center-Weighted/ Spot Fill-Flash
･ Standard TTL Flash
･ Matrix Balanced Fill-Flash
II */**
･ Center-Weighted/ Spot Fill-Flash P. 26
･ Standard TTL Flash
･ Matrix Balanced Fill-Flash
III
･ Center-Weighted/ Spot Fill-Flash P. 28
･ Standard TTL Flash
IV
･ Matrix Balanced Fill-Flash
P. 30
･ Center-Weighted Fill-Flash
V
･ Programmed TTL Auto Flash
P. 32
･ Standard TTL Flash
VI
･ Standard TTL Flash P. 36
VII
***
･ Non-TTL Auto Flash
R
P. 38
TTL
A
M
M
ZOOM
ISO
mm
f t m
60
30
15
7
4
2
18
9
4
2
1
0.6
Flash mode indicator
Flash shooting distance
scale
Flash mode selector
Aperture indicator
“M” (M/ISO) button
*The SB-27's flash mode indicator changes every time the “M” button is pressed.
** Center-Weighted Fill-Flash/Spot Fill-Flash is not possible with F80-Series/N80-Series
and Pronea 600i/6i cameras.
***Only possible when the camera setting switch is set to ˚. (See page 13.)
Set the flash mode selector to “AUTO” and flash modes for
each camera group automatically become available.
****Automatic Balanced Fill-Flash with TTL Multi Sensor is a general term for both
3D Multi-Sensor Balanced Fill-Flash and Multi-Sensor Balanced Fill-Flash.