Nikon SB-27 - Manual (Page 38)

38
With cameras in Group VII, be sure to set the camera setting
switch (inside the SB-27's battery chamber) to ˚, and
choose “AUTO” (in the flash mode selector); the flash mode
is automatically set to Non-TTL Auto Flash.
—In non-TTL Auto Flash mode, flash mode indicator ˙ appears in the
SB-27's LCD panel.
Procedures
Nikkor lenses with built-in CPU*
Nikkor lenses without built-in CPU
Non-TTL Auto
Flash
˙
Available flash
operation Lens in use
1 2
Flash operation in AUTO mode
(Cameras in Group VII:
NOTE
• Set the lens to the same aperture value as in the SB-27 to obtain
a correct exposure.
• A usable aperture value appears in the SB-27's LCD panel
whenever you press the “F” button.
*G-type Nikkor lenses cannot be used.