Nikon SB-27 - Manual (Page 52)

52
Bounce flash operation
(Applicable to all camera groups)
4
Set up the built-in bounce flash adapter.
2
1
Pull out the bounce flash adapter ➀ , then raise it approx. 45° ➁ .
(The bounce flash indicator appears in the LCD panel.)
—Do not force the bounce flash adapter.
5
Confirm that the ready-light is ON, then release the
shutter to fire the flash.
TTL
A
M
ISO
f t m
60
30
15
7
4
2
18
9
4
2
1
0.6
If the ready-light blinks for 3 seconds after shooting, reconfirm
the flash shooting distance range or select a wider aperture,
and then reshoot.
—In bounce flash operation, no indicator bars appear in the LCD
panel. (The SB-27 no longer indicates the correct relationship
between aperture and flash shooting distance range.)