Nikon SB-27 - Manual (Page 68)

68
Multiple flash operation
—(Applicable to all camera groups)
1
Use the sync terminal for connecting the SB-27 with
other Speedlight slave units via optional sync cords.
2
Set Manual (M) Flash mode on each Speedlight.
3
Setting up a master flash unit and slave unit(s)
Set the zoom-head position and the flash-to-subject shooting distance
on the master flash unit. Set the slave unit(s) in the same way.
4
Follow the same procedures as in Manual (M) Flash mode.
For guide numbers for each light output in Manual (M) mode,
see page 46.
Manual multiple flash operation procedures
(Applicable to all cameras)
Speedlights which can serve as a slave flash unit
SB-80DX, SB-30, SB-29s/29, SB-28/28DX, SB-27, SB-26, SB-25,
SB-24, SB-22s, SB-22, SB-20, SB-17, SB-16, SB-15, SB-14, SB-11,
SB-140
Usable remote cords (optional) (See page 77.)
Sync Cord SC-11/SC-15
TTL Remote Cord SC-17
TTL Multi-Flash Sync Cord SC-18/SC-19